"Most Popular" / 1-2-3 Color Labels / Mailing Labels / Laser Sheet Labels / Computer Labels / Specialty Labels / Helpful Information / Electronic Specifications Welcome to Labels by RCHP.COM

Artwork Guidelines

Your camera-ready art may be used if artwork:

is clean, flat, black-and-white artwork sized to fit
has 1/8" margin on all sides
is provided in PMT form
requires no typesetting

Camera-ready art means a negative can be produced with no additional work. Photocopies or photographs are not acceptable. All camera-ready art for multi-ink orders should also be color-separated with registration marks. A tissue overlay showing color breaks is recommended. When furnishing artwork for screens, do not pre-screen the artwork; handle as a multi-ink order with separation. Screens available in 85 or 120 lines (depending on order) with tints in 10% increments (10% minimum). Graduated screens must be supplied camera-ready and cannot be any lighter than 10%.

We will touch up artwork when necessary at no charge, but we reserve the right to charge for extensive artwork touch-ups, color separations or layout changes.

Acceptable Camera-Ready Art

India Ink (black): on a white, hard-surfaced stock
Flat-Printed Samples: if printed in black or red on white stock
PMT: photomechanical transfer
Logo Slick: printed on white stock in black ink
Laser Print: depends entirely on quality; we must see art to make judgment
Line Negative

Unacceptable Camera-Ready Art

Flat-Printed Samples: if not printed in black or red on white paper
Thermographed Samples
Ballpoint Pen or Pencil
Foil Stamped or Embossed Sample
Low Resolution Laser Print
Pre-Screened Artwork
Yellow Page Ad
Facsimiles
Photocopy

Production Schedule

Product			   		Production Time

FasTurn 1-Color Labels						48 Hours

FasTurn 1-2-3 Color Labels			1-Color		48 Hours*
						2-Color		48 Hours*
						3-Color		72 Hours*

Fasturn Stock Mailing Labels            			48 Hours

Laser Labels					Blank		48 Hours
						1-Color		72 Hours*
						2-Color		72 Hours*
Computer Labels					1-Color		48 Hours*
						2-Color		48 Hours*
						3-Color		48 Hours*

Hot Stamped / Embossed Labels					72 Hours

Weather Resistant Labels			1-Color		24 Hours*
						2-Color		48 Hours*
						3-Color		48 Hours*
	

Consecutive Numbered Labels					72 Hours

Static Cling					1-Color		48 Hours*
						2-Color		48 Hours*
						3-Color		72 Hours*


Celebration Labels						 6 Days						

Ready Message							48 Hours


*For non-standard ink(s), add one additional day to production time.

Production time is in working days and provided as an estimate, but should not be considered as a guarantee . Shipment of order may be delayed if all material or information to produce order was not submitted at time of order.

Special Charges

Art Touch-up......(minimum)................................$15.00

Borders...........(To Draw)................................$15.00

Cancellation
  If the labels are already printed, full price will be charged
........(order entered in system)..................minimum $15.00
........(order in progress with artwork started)...minimum $25.00
  
Change in Order...(order entered in system)........minimum $15.00

Copier Proof...............................................$13.00

Custom Ink Color..(per ink)................................$38.00

Ink Colors: Yellow, Teal, Orange and Gray (per ink).......$ 13.00

Dispenser Boxes...(each additional)........................$ 0.25

Drop Shipments....(per location)...........................$ 0.75

Extra Lines - over 4 lines on mailing per line.............$ 1.00
            - over 7 lines on advertising per line.........$ 1.00

Individual Bend and Peel cutting charge....(per order).....$28.00

Stock Selection

White Gloss (A) Mirror-finish paper stock for high-quality detail reproduction. Not recommended as a writing surface.

Application temp: -10°F min./Service temp: -65°F to +200°F

Yellow Gloss (B) Gloss-coated stock. Not recommended as a writing surface.

Application temp: -10°F min./Service temp: -65°F to +200°F

Ivory Gloss (BC) Gloss-coated stock. Not recommended as a writing surface.

Application temp: -10°F min./Service temp: -65°F to +200°F

Red Fluorescent (C) Day-glo matte stock; attention demanding, suitable for writing; black printing only is recommended.

Application temp: +25°F min./Service temp: -40°F to +250°F

Bright Gold Foil (D) Foil-laminated paper stock for a bright metallic appearance. Visually appealing and elegant. Not recommended as a writing surface.

Application temp: -10°F min./Service temp: -65°F to +200°F

Bright Silver Foil (E) Foil-laminated paper stock for a bright metallic appearance. Visually appealing and elegant. Not recommended as a writing surface.

Application temp: -10°F min./Service temp: -65°F to +200°F

Clear Film (BJ) Clear labeling for inside use. A "no label look" stock for indoor use only.

Application temp: +40°F min./Service temp: -65°F to +200°F

White Matte Litho (G) Stock provides excellent printability and color clarity. Correctability on some typewriters may be limited.

Application temp: +25°F min./Service temp: -65°F to +200°F

White EDP (H) Pinfed/fanfolded - An uncoated, smudge-resistant stock. Meets high-speed requirements of data systems market.

Application temp: +25°F min./Service temp: -65°F to +200°F

Yellow EDP (BI) Pinfed/fanfolded - An uncoated, smudge-resistant stock. Meets high-speed requirements of data systems market.

Application temp: +25°F min./Service temp: -65°F to +200°F

Ivory EDP (BT) Pinfed/fanfolded - An uncoated, smudge-resistant stock. Meets high-speed requirements of data systems market.

Application temp: +25°F min./Service temp: -65°F to +200°F

White Polyolefin (W) Stock suitable for indoor or outdoor use. Stock is overlaminated.

Application temp: +10°F min./Service temp: -40°F to +176°F

Yellow Polyolefin (V) Stock suitable for indoor or outdoor use. Stock is overlaminated.

Application temp: +10°F min./Service temp: -40°F to +176°F

Black Polyolefin (T) Stock suitable for indoor or outdoor use. Stock is overlaminated.

Application temp: +10°F min./Service temp: -40°F to +176°F

Brushed Gold Poly (Z) Stock suitable for indoor or outdoor use. Stock is overlaminated.
Application temp: +50°F min./Service temp: -40°F to +300°F

Brushed Silver Poly (S) Stock suitable for indoor or outdoor use. Stock is overlaminated.
Application temp: +50°F min./Service temp: -40°F to +300°F

Bright Gold Poly (U) Stock suitable for indoor or outdoor use. Stock is overlaminated.
Application temp: +50°F min./Service temp: -40°F to +300°F

Bright Silver Poly (X) Stock suitable for indoor or outdoor use. Stock is overlaminated.
Application temp: +50°F min./Service temp: -40°F to +300°F

Clear Polyester (Y) Stock suitable for indoor or outdoor use. Stock is overlaminated.

Application temp: +50°F min./Service temp: -40°F to +300°F

Static Cling Clear (CC) Stock not suitable for outdoor use.

Static Cling White (CW) Stock not suitable for outdoor use.

Typestyles

Top of Page Next Page

Home / At-A-Glance / E-Mail Us